We at Esthetrix are dedicated to the purpose of making the practice of dentistry easier and affordable. Through our years of hands on experience in dental practice, we are perfectly familiar with the challenges in dentistry and are committed to making it a very enjoyable experience for dentists.
The Composite Warmer is designed to be used to heat the resin and to place the prepared inlay and veneer to improve the bonding performance, to prevent premature curing of the composite material and to heat the resin injection compile. (With a special filter material, it can filter out 99% blue light).
Content
Esthetrix Composite Softner:
The Composite Warmer is designed to be used to heat the resin and to place the prepared inlay and veneer to improve the bonding performance, to prevent premature curing of the composite material and to heat the resin injection compile. (With a special filter material, it can filter out 99% blue light).
Composite Warmer uses a precise circuit to control the heating, so that the temperature tolerance is controlled at 1⁰C.
Depending on the choice of material and personal preference, the temperature can be set to:
40⁰c / 50⁰c / 60⁰c
Technical Parameters :
Power adapter
Input : 100-240V AC 50/60Hz
Output : 12V DC 2A
Main Units
Power: 24W
Temperature seng : 40 1⁰C, 50 1⁰C and 70 1⁰C
USES:
Warm LA cartridge before anesthesia (40⁰)
Warm hypochlorite during endodontic procedures (50⁰)
Warm silanated veneers before bonding (50⁰)
Warm composite resin for injection molding or bonding (60⁰)
[pdf-embedder url="https://wordpress-854801-3055602.cloudwaysapps.com/wp-content/uploads/2020/06/Warmer.pdf"]
